Time Transfer GPS Receiver
MODEL: MR-600T
GPS receiver and antenna in a fully weather proof enclosure for time transfer application
The AQTIME MR-600T is the integration of a timing GPS receiver and antenna in a compact/weather proof enclosure for time transfer application. It outputs UTC synchronized 1PPS with +/- 1 microseconds tolerance, which is close to an atomic clock in accuracy.
As a time transfer device, the AQTIME MR-600T is capable of operating with even 3(three) satellites after having a fix position with 3 or more satellites previously, so you can get precise time base anywhere on the Earth even under a very harsh environment where only one satellite is available.
Key Features:
- UTC synchronized precise time base can be obtain anywhere
on the earth at a relatively low cost
- Ultra compact, fully weather-proof, easy to mount
- Quick start, 18 seconds warm start typical
- Continue to output time data with even one satellite tracked
- Wide supply voltages range (9~34VDC)
- Low power consumption (0.9W typical)
Applications:
- Time Stamp Data Logger
- Synchronization of radio base stations for cellular
- Phone, pagers,¡Ketc.
Time control of computer terminals connected to network
Specifications:
| Specifications |
Parameter |
Description |
| General |
|
L1 frequency, C/A code(SPS),
12 Independent tracking channel |
| Sensitivity |
|
-143 dBm (tracking) |
| Accuracy |
Position |
15m CEP , 5m(waas) |
| Velocity |
0.1 m/sec. 0.05m/s(waas) |
| Time |
+/- 1 µs RMS (static mode) |
| Acquisition
|
Cold start |
45 sec. (typical) |
| Warm start |
38 sec. (typical) |
| Hot start |
8 sec. (typical) |
| Reacquisition |
|
100 ms typical (signal reacquisition) |
| Dynamics |
Altitude |
18000m max. |
| Velocity |
500 m/sec. |
| Vibration |
4G max. |
| Operation Temperature |
|
-40°C to +85°C |
| Storage Temperature |
|
-45°C to +90°C |
| Operating Humidity |
|
0% to 95% RH, non condensing |
| Water Resistance |
|
100% waterproof |
| Primary Power |
|
9V ~ 34V DC |
| Power Consumption |
|
130mA |
| Protocol |
|
NMEA-0183 v3.0 baud rate 4800/9600/19200/38400/115200, default 4800 |
| Signal level |
|
RS-232(standard),USB & RS-422 optional |
| NMEA Message |
|
GGA, GLL, GSA, GSV, RMC, and VTG |
| DGPS Capability |
|
Direct RTCM-SC104 interface |
| EMI filter |
|
Rejects power line interference |
| Power cable |
|
UL 2464, 10M |
| Enclosure |
|
High impact, corrosion-proof polycarbonate resin |
| Connector |
|
open |
| Dimensions |
GPS Locator |
112mm(Dia.) x 104 mm(H) |
| Mounting Base |
|
| Weight |
|
270 grams |
| Standard Mounting |
|
Concinnity and Solid design |
|
