MR-700B is Marine GPS receiver. Its excellent performance easily conquers the most difficult tasks. In addition , it provides various functions to meet customers' needs.MR-700B It provides marvelous navigation performance under dynamic conditions in areas with limited sky view like urban canyons.
Features
16 channel ANTARIS 4 positioning engine
Ultra high sensitivity to -158 dBm
Supports DGPS, WAAS, EGNOS and MSAS
Supports Power saving modes
15 μA backup current
Ultra low power consumption 39mA
Possible Application:
Marine Navigation.
Fleet Management.
Mileage Management.
Tracking devices/system.
Data logging for marine Navigation.
Mapping devices for PC & Pocket PC.
Marine Navigation or touring devices.
AVL and Location-Based service system.
Specifications:
| Specifications |
Parameter |
Description |
| General |
|
L1 frequency, C/A code(SPS),
16 Independent tracking channel |
| Sensitivity |
|
-158 dBm (tracking)
-148dBm (Acquisition/Reacquisition) |
| Accuracy |
Position |
2.5 meters CEP / 2.0 meters CEP |
| |
|
| Time |
50 nanosecond rms (1 PPS) |
| Acquisition
|
Cold start |
45 sec. (typical) |
| Warm start |
33 sec. (typical) |
| Hot start |
3.5 sec. (typical) |
| Reacquisition |
|
100 ms typical (signal reacquisition) |
| Dynamics |
Altitude |
18,000 meters (60,000 Feet) max |
| Velocity |
515 meters /sec (1000 Knots) max. |
| |
. |
| Operation Temperature |
|
-40¢X C to +85¢X C |
| Storage Temperature |
|
-45¢X C to +90¢X C |
| Operating Humidity |
|
0% to 95% RH, non condensing |
| Water Resistance |
|
100% waterproof |
| Primary Power |
|
7V ~ 40V DC |
| Power Consumption |
|
60mA |
| Protocol |
|
NMEA, UBX (ublox proprietary), RTCM |
| Signal level |
|
RS-232(standard), & RS-422 optional |
| NMEA Message |
|
GGA, GLL, GSA, GSV, RMC, and VTG |
| DGPS Capability |
|
Direct RTCM-SC104 interface |
| EMI filter |
|
Rejects power line interference |
| Power cable |
|
UL 2464/26Awg 10M |
| Enclosure |
|
High impact, corrosion-proof polycarbonate resin |
| Connector |
|
Open |
| Dimensions |
GPS Locator |
90.5mm(Dia.) ¡Ñ 108.5mm(H) |
| Mounting Base |
70mm(W) ¡Ñ 41.5mm(H) optional FB1 & FB2 & FB3 |
| Weight |
|
200 grams |
| Standard Mounting |
|
Concinnity and Solid design |
This specification is subject to change without prior notice |
