| Physical Condition |
| Construction |
Polycarbonate- radome at top, die-cast shell at bottom/ rubber gasket for water seal in between |
| Dimension |
25.7mm (L) x 22mm (W) x 10mm (H) |
| Weight |
30 grams (excluding cable & connector) |
| Standard Mounting |
Magnet mount with one magnets |
| Optional Mounting Plate |
customized metal sheet |
| Environmental Conditions |
| Operation temperature |
-40°C to +85°C |
| Storage temperature |
-40°C to +100°C |
| Relative Humidity |
95% non-condensing |
| Cable & Connector |
| Cable |
3 or 5 meter RG174/U (standard) cable, other length available |
| Pulling Strength |
6 Kg @ 5sec with molded plastics on connector end for strain relief |
| Connector Available |
BNC,TNC,FME (to be adapted), GT5, MCX (OSX), SMA, SMB or SMC in straight or right angle |
| Optional Adapters |
Universal Connector Adapter (FME to TNC/BNC/SMA/SMB/MCX) |
| Antenna Element |
| Center Frequency |
1575.42 MHz +/-1.023MHz |
| Polarization |
R.H.C.P. (Right Handed Circular Polarization) |
| Absolute Gain @ Zenith |
3 dBic Typ. |
| Gain |
90° : 2.0dBi min.
20° : -5.0dBi min.
Mounted on the 60mm x 60mm square ground plane |
| Axial Ratio |
90° : 3.0dB max.
Mounted on the 60mm x 60mm square ground plane |
| Low Noise Amplifier |
| Center Frequency |
1575.42 MHz +/- 1.023 MHz |
| Gain |
28 +/- 4.5dB |
| Bandwidth |
10 MHz min. @S11λ-10 dB |
| Noise Figure |
1.5dB Typ. |
| Filter |
25dB @ f° ± 50MHz
35dB @ f° ± 100MHz
* f° = 1575.42MHz |
| Supply Voltages |
2.5 ~5.5V DC |
| Current Consumption |
2.5V : 6.6mA Typ.
3V : 8.6mA Typ.
4V : 12.6mA Typ.
5V : 16.6mA Typ. |
| Output Impedance |
50 ohm |
| Output VSWR |
2.0 max. |
| Overall Performance (Antenna Element, LNA & Cable) |
| Frequency range |
1575.42 +/- 1.023 MHz |
| Gain |
At 90° 30 ± 4.5dBi-(cable loss) Note:1
Mounted on the 60mm x 60mm square ground plane |
| Output Impedance |
50 ohm |
| VSWR |
2.0 max. |
