Bluetooth GPS Receiver
MODEL: BT-268
High Sensitivity & Individually outlook design for your Wireless GPS Applications
BT-268 integrates Bluetooth wireless with GPS positioning technology to remove the limitation range from wired GPS receiver. Also, BT-268 is easy installation, small size and quick-time-to-market in GPS receiver products. The chipset used for BT-911 is the SiRF Star III with build in flash based firmware. In addition, two stages LNA, TCXO and RTC are also included. BT-268 has quick Cold Start/ fast TTFF performance. Without any wiring requirement, BT-911 adds GPS positioning capability to any Bluetooth enabled device. BT-268 may incorporate more features suitable for applications of vehicle/ employee tracking, POI marking.
Features:
- Smart Power Saving
- Bluetooth wireless technology
- Compact design with internal passive antenna
- High performance and high sensitivity
- With rechargeable, replaceable lithium-ion battery.
- Suitable for wireless GPS applications
Application:
- Automotive
- Fleet management / Asset tracking
- Personal / portable Navigation
(PDA, Smart phone)
- Location Based Services
- Sports and Recreation
- Geographic Surveying
Specifications:
| Category |
Parameter |
Description |
| General |
GPS Chipset |
SiRF Star III |
| Frequency |
L1, 1575.42 MHz |
| C/A Code |
1.023 MHz chip rate |
| Channels |
20 channels all in view tracking |
| Sensitivity |
-159 dBm tracking, superior urban |
| Receiver Accuracy |
Position |
2DRMS: approx. 10m |
| Acquisition Time |
Hot start |
1 sec, average |
| Warm start |
38 sec, average |
| Cold start |
42 sec, average |
| Limitations |
Acceleration Limit |
<4G |
| Altitude Limit |
<18,000 meters |
| Velocity Limit |
<515 meters/sec. |
| Power |
Battery |
Removable rechargeable lithium-ion battery. 5V DC input charging circuit |
| Operation Time |
10 hours typical after full charge,
continuous mode, 25°C |
| Physical Characteristics |
Dimension |
72(L) mm x 40(W) mm x 22(H) mm |
| Button & Connectors |
|
Power push button On/off Bluetooth GPS receiver
MMCX connect to internal antenna
Mini USB Connect to external power |
| LED Indicator |
GPS Status |
The green LED will start flashing once per 2 seconds when the GPS receiver is in acquisition mode, and will start flashing once per 5 seconds when the GPS position is fixed. (i.e., during tracking mode). |
| Bluetooth |
The blue LED will start flashing once per 2 seconds when the Bluetooth is in acquisition mode, and will start flashing once per 5 seconds when it is in connection and off if the Bluetooth connection between the host and the receiver is lost. |
| Battery status |
The red LED will light to indicate the battery power level is low. When on charging the battery, the green LED will turn to orange LED, and turn to green if the battery is fully charged. |
| Temperature |
Operating& Storage |
-20°C to +60°C |
| Humidity |
5% to 95% non-condensing |
|
